Overview
High Performance Retail Advantage
The ST-7000 integrates power and ultimate connectivity into a very small footprint to optimize selling space. Its robust and versatile design makes the ST-7000 the POS of choice for discerning retailers.
- Compact, robust, and fully integrated
- Flexible operating environments: MS-DOS, Windows and Red Hat Linux
- Easy maintenance via slide-out modules
- Advanced connectivity with powered USB ports
- Needs just a single power outlet to run POS and all peripherals.
- Flexible operating environments
- Compatible with MS-DOS and Windows operating systems.
- Also supports Red Hat Linux, complete with appropriate device drivers.
- Based on PC architecture, the ST-7000 can run off-the-shelf applications and specific software for niche retail sectors.
Eliminate system bottlenecks
- Fast 2.0 GHz Intel CeleronTM embedded processor
- 32-bit PCI bus
- Memory up to 2 GB reduces paging.
- Low cost of ownership
- Open system (OLE POS): protect your investment in existing POS peripherals.
- With powered USB available, you have a future-proof hardware platform.
- Powered USB ports make it easy to connect or replace POS peripherals.
- Easy installation, requiring just a single power outlet.
Easy maintenance
- Easy connection and disconnection of peripheral devices via the external interfaces at the rear of the machine.
- Slide-out modules.
Slide-out modules
Hard disk, internal UPS, and mother board are accessible via slide-out modules. The key components can be swapped out locally without the need for a service engineer visit.
- Minimize downtime.
- Reduce overall cost of maintenance.
- Improve checkout productivity.
Security and reliability
- Internal UPS
- Front panel cover with key lock preventing unauthorized access to floppy drive, CD drive, and power switch
- 'Heat release' design enabling cabinet air flow and CPU monitoring.
- Advanced connectivity
Exceptional connectivity is achieved via the new industrial power supply, which is built to run the POS and all peripherals from a single AC outlet.
Key Features & Benefits
Speed & Performance
This POS control unit excels by increasing throughput while lessening manual processing of registered data especially in the face of staggering amounts of transactions.
It is an absolutely reliable powerhouse behind the front end, promising benefits to store management that would have seemed impossible only a few years ago.
To Make Use of Existing Assets
Nevertheless we have found still more ways to increase its functionality. In this newest POS technical innovation, rather than offering equipment with a short life cycle, we have designed the ST-7000 so that the engine-board can be upgraded in the same cabinet, so the unit can continue to be used for years to come. Also, it is compatible with Legacy Interface, which means the retail customer can make the most of software assets available now and in the future.
Easy Maintenance
To reduce the total cost for retailers in respect to daily service, the unit is designed to allow easy maintenance. Potential overheating and interruptions can be prevented by confirming the CPU's surface temperature display and the CPU fan speed. Also, by releasing the front panel's security lock, it becomes possible to easily replace the HDD or the UPS from the front. As well, the number of screws has been reduced to permit easy removal or installation of the engine board.
Equipped with Powered USB
Still another new feature is "Powered USB," which makes it possible to connect a range of peripheral devices to the unit (see upper right image). The optional dual-display feature attractively displays commercial messages and images, as well as store notices and event information for shoppers.
Technical Specifcations
| Model |
ST-7000 Entry |
ST-7000 Standard |
| CPU |
Celeron® 1.2GHz |
Celeron® 2.0GHz |
| Memory |
128MB, 2slots(max.2GB)
PC2700 DDR SDRAM without ECC |
256MB, 2slots (max.2GB)
PC2700 DDR SDRAM with ECC |
| Interface |
RS-232C x 2, Powered RS-232C x 2, (option Powered RS-232Cx2)
Powered USB Option (12V x 3, 24V x 1 or 24V x 1)
USB x 1 Version2.0 (front)
VGA x 1
Parallel x 1
Drawer x 2
PS/2 Keyboard
LAN (10Base-T/100Base-TX)
Line-out/Mic-in |
RS-232C x 2, Powered RS-232C x 3, (option Powered RS-232C x 1)
Powered USB 12V x 3, 24V x 1
USB x 2 Ver.2.0 (front & rear)
VGA x 1
Parallel x 1
Drawer x 2
PS/2 Keyboard & PS/2 mouse
LAN (10Base-T/100Base-TX)
Line-out/Mic-in |
| Expansion Slot |
PCI x 2 |
PCI x 2 |
| FDD |
Option (external) |
Option (external) |
| HDD |
Option (external) |
Option (3.5" x 2 bays) |
| CD-R/RW |
Optional (mount kit) |
Option (mount kit) |
| Dual Display I/F |
Option (LVDS) |
Option (DVI-D/LVDS) |
| AC outlet |
Yes |
Yes |
| Printer Power Supply |
+24V Out |
+24V Out |
| UPS |
No |
Option |
| Dimensions |
315(W) x 466(D) x 112.5(H) mm
12.4(W) x 18.3(D) x 4.4(H)inch |
315(W) x 466(D) x 112.5(H) mm
12.4(W) x 18.3(D)x4.4(H) inch |
| Weight |
9.5Kg, 21lbs (excluding options) |
9.5Kg, 21lbs (excluding options) |
| Support OS |
Windows 2000, Windows XP, MS-DOSV6.22, Certified Linux |
Windows 2000, Windows XP, MS-DOS V6.22, Certified Linux |
All features and specifications shown are subjected to change without notice.
